A truck, and any vehicle in general, must undergo safety and operational checks before going on long trips.Thus, in this post, Esyntheticmotoroil in Fairfield Township teaches the importance of doing truck inspections.
Are you looking for a certified AMSOIL dealer in your area? Reach out to Esyntheticmotoroil in Fairfield Townshipby callingat (513) 348-0758 to place an order and see how their synthetic oil formulas improve truck performance.
Periodic Inspections Prevent Road Accidents
No driver expects to get stranded in the middle of the road, but sudden engine defects can leave anyone in that position. Thus, inspecting the vehicle before you hit the road is crucial.
Also, besides getting stranded, remember that truck breakdowns will also cost you a lot of money you probably weren't prepared to disburse. So, the following post sheds light on a few signs you can't ignore when checking your truck before going on any trip.
Tires
Tires are the only contact point between the truck and the asphalt, and without suitable tires, it's fair to say that no driver can continue on their way safely. That's why it's fitting to check if they're in the proper condition to circulate on the street and highways. This preventative measure reduces the possibility of a puncture that could delay your road trip.
Cooling System
It's pretty unusual to experience flaws in the cooling system, so much so that drivers forget to inspect it often. But if the truck's engine overheats, the driver must instantly add more antifreeze fluid to keep it operating safely. Nevertheless, the cooling system may also deteriorate over time, affecting how the antifreeze rushes into the engine.
Safe Lubricant Oil Levels
Ensure the truck doesn't consume more fuel than necessary by verifying if it has sufficient lubricating oil for its correct operation. This way, the working temperature will remain within a safe range.
Get familiar with the best synthetic oil products on the market and contact the experts at Esyntheticmotoroil in Fairfield Townshipby calling (513) 348-0758, or stop by the AMSOIL's online store and browse through their whole catalog.
The Brake System
If you're unfamiliar with a truck's brake system, you must know that it is very different from the one in a car. Truck brakes use pneumatic pressure instead of hydraulic pressure. The compressed air induced by the compressor gets stocked in a reservoir, and when the driver starts the pedal or lever, a valve lets the stored air get to the piston and engage the brakes.
Truck drivers must keep an eye on this system, the compressor, and the truck's brake pads to decrease the risk of accidents. Also, a heavy and loaded truck can influence the braking system and reduce its stopping power as the excess weight induces a temperature rise in the brake pads.
The Fuel System
Another tip to prevent road accidents is by ensuring the entire fuel system is working correctly and seeing no obstructions stopping the diesel from getting to the engine. If necessary, add a diesel additive to boost the cycle's performance.
Also, ensure that the load is safe and that it doesn't fall from the truck causing an accident, that the lights are turned on, and that the electrical systems work, especially if you are traveling at night. Also, check that the steering and transmission have the necessary fluid and lubricant levels to operate correctly.
Getting Rid of Pollutants
The circulation of emissions through the exhaust is a technology that allows diesel engines to decrease the contaminants they eject. It's a perk in most of these engines, from light-duty engines to larger trucks; and even diesel powerboat engines.
These recirculation systems were prevalent and used in passenger vehicles during the 1970s and 1980s to avoid the excessive emission of pollutants. However, with the evolution of fuels and injection systems, it was no longer necessary for regular gasoline engines.
Modern Breakthroughs
However, recirculation systems became popular in large-capacity diesel engines quite recently. This was due to its much more complex installation as it was still used in gasoline-powered motor vehicles to save fuel.
How Does the System Work?
It takes a controlled portion of the emission gas, which is then recirculated to the intake manifold, controlled by a valve that opens or closes access to the gas. Once the gas re-enters the intake manifold, it re-mixes with the air, and the diesel engine's combustion process begins again.